SciCan Statim 2000 Manual do Operador descarregar pdf (Página 18)

4.7 Statim 2000 — Selecting a Cycle

The Statim 2000 has three sterilization cycles, each designed to sterilize a specific

type of instrument. The instruments will remain sterile after a successful cycle until

the cassette is removed from the autoclave. At the end of each sterilization cycle,

microbiologically filtered air-drying will commence for 1 hour. Air-drying can be

interrupted at any time.

Unwrapped instruments, once exposed to ambient or external conditions, cannot be

maintained in a sterile state. If sterile storage is desired, wrap the instruments to be

sterilized in autoclave bags according to the instrument manufacturer’s instructions,

and allow the wrapped cycle to run until the air-dry phase is complete.

The types of instruments, sterilization requirements, and a graph depicting each cycle

are described over the next few pages. Consult the Instrument Weight Guide in Section

4.6 for information on how to make up an appropriate load for the masses specified for

individual cycles.

1. Unwrapped Cycle

The Unwrapped Cycle is a general

purpose sterilization cycle used to

sterilize up to 1.0 kg (2.2 lbs) of solid

metal instruments such as pliers, burrs,

scalers and forceps. Dental handpieces

may be sterilized in this cycle.

To select the Unwrapped Cycle, press the

Unwrapped Cycle button, then press the

START button.

The sterilization temperature in the cassette is 134 ˚C (273 ˚F) and the holding time

is 3.5 minutes. See Section 4.1 Statim 2000 — Cassette, and Section 4.4 Preparing

and Loading Instruments before running this cycle.

4. Instructions For Use

Warming up

B Conditioning

C Pressurizing

D Sterilizing

E Venting

F Air Drying

3.5 MIN.*

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 48 49

Sem comentários

SciCan Statim 2000 Manual do Operador Página 18