SciCan Statim 2000 Manual do Operador descarregar pdf (Página 37)

6. The Communication Port (Not on all models)

6.3 Cycle Printout Overview

1. Model: STATIM 2000 software: S201R604

2. Unit Identifier: autoclave has been set up

as number 000

3. Cycle counter: the number of cycles

having been run on the unit = 2

4. Time / Date: 10:47 am 25th October 2007

5. Cycle Name: UNWRAPPED

6. Cycle Name cont'd - parameters:

135°C / 3.5 min

7. Cycle clock: starting at 0:00

8. Warm up complete: start of the

conditioning phase is 1:19

(see cycle graph - 'A' phase

complete, start of 'B' phase)

9. Start Time of Pressurization: 1:27

(start of 'C' phase)

10. Start Time of Sterilization: 2:27

(start of 'D' phase)

11. Temp. / Press. & Time at start of

sterilization ('D' phase)

12. to 17. Temp. / Press. & Time printed

at 30 second intervals during

sterilization. (“D” phase)

18. Temp. / Press. & Time of end of

sterilization phase (end of 'D' phase)

19. Time Venting started: 5:57 (start of 'E' phase)

20. Time Air Drying started: 6:42 (start of 'F' phase)

21. Cycle completion time: 22:42. This may not include the full 60 minute dry cycle

(refer to section 4.7/4, Air Dry Only Cycle.)

STATIM 2000 S201R604

UNIT # : 000

CYCLE NUMBER 000002

10:47 10/25/2007

UNWRAPPED

135º º

C FOR 3.5 MIN.

CYCLE START 0:00

CONDITIONING 1:19

PRESSURIZING 1:27

STERILIZING 2:27

136.4

C 220KPA 2:27

136.0

C 219KPA 2:57

135.9

C 222KPA 3:27

136.1

C 222KPA 3:57

136.5

C 225KPA 4:27

136.4

C 225KPA 4:57

136.1

C 221KPA 5:27

136.2

C 221KPA 5:57

VENTING 5:57

AIR DRYING 6:42

CYCLE COMPLETE 22:42

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 48 49

Comentários a estes Manuais

Sem comentários

SciCan Statim 2000 Manual do Operador Página 37

Comentários a estes Manuais

Manuais e produtos relacionados com Recetores multimédia para automóveis SciCan Statim 2000