SciCan Statim 2000 Manual do Operador Página 7

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 6
6
3. Installation
3.1 Environmental Considerations
There are several factors that may affect the performance of your Statim.
Please review these factors, and select a suitable location in which to install the unit.
Temperature and Humidity
Avoid installing your Statim in direct sunlight or close to a heat source
(e.g. vents or radiators). The recommended operating temperatures are
15-25˚C (59˚F to 77˚F) with humidity of 25-70%.
Spacing
The vents and openings on the Statim should remain uncovered and unobstructed.
Leave a minimum of 50 mm/2˝ between the top, sides and back of the unit and
any wall or partition.
Venting
The Statim should be operated in a clean, dust free environment.
Work Surface
The Statim should be placed on a flat, level, water-resistant surface.
Never install and operate the unit on a sloped surface.
Electromagnetic Environment
The Statim has been tested and meets applicable standards for electromagnetic
emissions. While the unit does not emit any radiation, it may itself be affected by other
equipment which does. We recommend that the unit be kept away from potential
sources of interference.
Electrical Requirements
Use properly grounded and fused power sources with the same voltage rating as
indicated on the label at the back of your Statim. Avoid multiple outlet receptacles. If
using a surge suppressor power bar, plug in one Statim only.
3.2 Unit Placement
When placing the unit on a counter top, ensure the following:
The level indicator bubble
n
1
on the front panel should be
balanced in the front right quadrant of the target. This
will ensure that the unit drains properly. Adjusting the
three leveler feet will help you move the bubble if
necessary.
The unit should be stable and all four feet should be
securely in contact with the counter surface.
This will prevent the unit from moving freely.
n
1
Figure 3
Vista de página 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 48 49

Comentários a estes Manuais

Sem comentários