SciCan Statim 2000 Manual do Operador descarregar pdf (Página 30)

5.6 Changing the Bacteria Retentive Air Filters

The filters should be replaced every six months or after 500 cycles to maintain

an adequate supply of clean air during the air drying cycle.

To change the bacteria retentive air filter on the Statim 2000 and 5000,

follow these steps:

1. Power the Statim OFF.

2. Disconnect tube A

from the bacteria

retentive filter

and remove the filter from

the filter bracket

. As you remove the filter

from the bracket, note the orientation of the

arrow mark on the filter.

3. When the filter is free of the bracket, carefully

disconnect tube B

from the filter.

4. Before installing the replacement

bacteria retentive filter

(SciCan order

no. 01-102119S) check that the arrow

mark on the filter matches the direction

of the arrow on the bracket. Push the left

hand filter fitting into tube B

5. Gently press the replacement filter into

the filter bracket

. The arrow mark of

the filter should be facing out and pointing

to the left.

6. Re-connect tube A

to the right hand filter fitting.

5.7 Replacing the Cassette Seal

To ensure optimum performance of your Statim cassette autoclave, change the

cassette seal every 500 cycles or every six months, whichever comes first.

Replacement seals are available from SciCan (order number 01-100028S for

Statim 2000 and 01-101649S for Statim 5000).

To change the cassette seal, follow these steps:

Place the cassette lid and the new seal on a clean work surface. Examine the position

of the old seal in the cassette lid and arrange the new seal in the same orientation,

next to the lid.

5. Maintenance

Figure 11

Figure 12

5000

2000

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 48 49

Comentários a estes Manuais

Sem comentários

SciCan Statim 2000 Manual do Operador Página 30

Comentários a estes Manuais

Manuais e produtos relacionados com Recetores multimédia para automóveis SciCan Statim 2000