SciCan Statim 2000 Manual do Operador descarregar pdf (Página 4)

2.1 Disclaimers

Use only steam-process distilled water in your Statim. Deionized, demineralized, or

specially filtered water should not be used. Never use tap water.

Do not permit any person other than certified personnel to supply parts for, service or

maintain your Statim. SciCan shall not be liable for incidental, special or consequential

damages caused by any maintenance or services performed on the Statim by a third

party, or for the use of equipment or parts manufactured by a third party, including lost

profits, any commercial loss, economic loss, or loss arising from personal injury.

Never remove the cover of the unit and never insert objects through holes or openings in

the cabinetry. Doing so may damage the unit and / or pose a hazard to the operator.

All elements of this book are common to both Statim 2000 and Statim 5000 except

when noted.

IMPORTANT:

Follow local guidelines governing verification of the sterilization procedure.

Drying Performance

The Statim 2000 and 5000 have been designed to provide a complete sterilization

solution for your unwrapped and wrapped instrument needs: rapid sterilization

balanced with rapid drying, by using the SciCan Dri-Tec Drying Technology.

To dry instruments, the Statim 2000 uses a combination of forced filtered air and

convection heat. The convection heat is derived from utilizing the remaining heat in the

system after the sterilization phase has been completed. The heat is then captured and

released into the cassette to rapidly dry a properly loaded cassette.

The Statim 5000 also uses forced filtered air and heat generated by the sterilization

phase to dry the instruments. The heat generated by the sterilization phase is absorbed

by the drying plates and then transferred directly to the load. This then results in an

accelerated, rapid drying of a properly loaded Statim cassette.

Please refer to this operator's manual for instructions on the proper arrangement of

instruments in the cassette and the use of Stat-Dri plates (Statim 5000). By carefully

following these directions on how to properly load the cassette chamber, rapid drying of

the load will be achieved.

2. Important Information

1 2 3 4 5 6 7 8 9 ... 48 49

Sem comentários

SciCan Statim 2000 Manual do Operador Página 4